Helix V & VE
Vertical Multistage
Vertical – inline, high-efficiency multistage high-pressure centrifugal pump suitable for potable or raw water supply, pressure boosting, cooling, irrigation and process water.
Hydraulics all in 304 stainless with laser welding, rebuildable cartridge mechanical seal and seperate axial bearing support ensure that this premium multistage pump is built for durability. The VE version in IE4 efficiency with intergrated frequency inverter and simplified pump programming bring this range to life, providing end users with optimum efficiency and smooth un-interupted pressure.
Country of Origin: France
- Corrosion-resistant impellers, guide vanes and stage housing 304 and 316 options.
- Efficiency-optimised, laser-welded 2D/3D hydraulics, flow and degassing optimised.
- VE option for integrated VSD with simplified pump programme and smart controller.
- Flows to 80m³/hr, Heads to 200m.
- Ports sizes from 25mm to 80mm.
- 0.37 to 37 Kw motors.
- Cartridge seal, O rings in EPDM or FKM.
- Operating pressures from 16 to 40 Bar.
Medana / MHI/ MHIE
Horizontal Multistage
Wilo Medana is a horizontally mounted and compact multistage high-pressure centrifugal pump suitable for potable or raw water supply, pressure boosting, cooling, irrigation and process water.
Released in 2020 the Medana is the replacement for the trusty Wilo MHI series pumps and brings a new level in efficiency and performance.
Country of Origin: France
- Corrosion-resistant impellers, guide vanes and stage housing 304 and 316 options.
- High efficiency with easy accesbile design and low noise output.
- 230V and 400V with option for integrated variable speed control (MHIE).
- Flows to 25 m³/hr, Heads to 100m, max operating pressure 10 Bar.
- Ports sizes from 25mm to 40mm.
- 0.37 to 3 Kw motors.
- Mechanical seal, O rings in EPDM or FKM.
- Suitable for drinking water and compliant to UL certificate.
HiMulti
Domestic Pressure System
Premium domestic pump, self-priming, compact multistage high-pressure, whisper quiet and compliant to AS/NZS4020 drinking water standards make the Wilo HiMulti ideally suited for potable water pressure boosting to homes and small commercial buildings.
Country of Origin: France
- Automatic pump control.
- Low-water cut-out switch.
- Mains connection: 1~230 V, 50 Hz.
- Perm. fluid temperature: 0 °C to +40 °C (+55 °C for 10 min).
- Perm. ambient temperature: -15 °C to +40 °C.
- Max. permissible inlet pressure: 3 bar.
- Start-up pressure: 1.5 bar.
- Switch off volume flow: 95l/h.
- Protection class: IP54.
SiBoost Smart Helix VE
Pressure Booster Sets
Fully automatic water supply in residential/office buildings & industrial systems. For pumping drinking / process water, cooling water, smart functions for water pressure boosting to buildings, irrigation and industrial process.
Utilising the Helix VE pumps with extended funcitionality from the SCE controller the SiBoost pressure boosters set the standard for efficiency, communication and user friendly service.
Country of Origin: France
- Based on the Helix VE vertical multistage pumps.
- Single or multi pump options 2,3, or 4.
- Integrated variable speed control with simplified pump programme and smart controller.
- Flows to 350m3/hr, Head to 140m.
- IE4 and IE5 standard high efficiency motors.
- Integrated manifolds and valves.
- Entire system is pressure-loss optimised with dry run protection.
- Suitable for industrial applications with approved fluids.
Atmos Tera SCH
Split Case Pumps
High volume water supply, Heating and cooling, pressure boosting, Boiler feed and industrial process.
Country of Origin: Germany
- Horizontally, axially split pump housing, separately coupled,
Single and two stage hydraulics. - Cast iron housing / bronze impeller.
- Flows to 3,400 m3/hr up to 17,000 m3/hr available on request.
- Head to 245m.
- High efficiency models available.
- Various sealing options.
- Suitable for potable water and industrial applications.
VDP Series
Vertical Turbine Pumps
Vertical line shaft turbines are ideal for suitations where it is not practical to use a submersible motor and high efficiency is still required.
This is often in bores where the water has dropped to low levels or in rivers and lakes where there are installation challenges.
Country of Origin: Germany
- Dry well install with submerged pump hydraulics.
- Design to order as per customer requirements.
- High hydraulic efficiency.
- Discharge diameters from DN100 to DN2000.
- Flows to 40,000 m3/hr.
- Head to 450m.
- Drive options of electric, diesel or steam turbine.
- Bearing lubrication by product or by separate bearing lubrication.
Atmos GIGA-N, B
End Suction Centrifugal
Newly developed and highly efficient, the Atmos Giga series sets new standards in end suction pumps. Designed specifically for continuous duty, the pump also boasts a long service life thanks to its corrosion-resistant coatings and maintenance-free roller bearings.
Mostly used for pumping of heating water, cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems, irrigation, building services and general industry.
Country of Origin: Germany
- Versions Giga N long coupled and Giga B close coupled.
- Optimised efficiency levels using state-of-the-art hydraulics.
- EN733 and ISO 5199 versions.
- Low NPSH values
- High temp (140°C) and Pull back options
- Options for various motor types eg; electric, Atex electric or diesel.
- Various seal types.
- Flows to 2800 m3/hr and Heads to 140m.
Zeox First H & V
Multistage High Pressure
High pressure horizontal and vertical multistage pumps in a robust design using cast iron and bronze contstruction. Suitable for pumping of raw water, boiler feed water, washing systems, mine dewatering, desalination plants, fire fighting and many other areas of industry.
Country of Origin: Germany
- Long coupled Horizontal or Rigid Vertical.
- Cast Iron with cataphoretic coating, options for Bronze impeller.
- Options for high casing pressures of up to 55 bar.
- High temperature options of up to 90 deg C.
- Multiple sealing options.
- Hydraulic axial compensation.
- Max flow 280 m3/hr.
- Max head 495 m.