SCM Pumps

Submersible Aerators

  1. »
  2. Products
  3. »
  4. SCM
  5. »
  6. Submersible Aerators
  7. »
  8. Submersible Aerators

Page Content

SC/SCL

Radial Self Aspirating

Radial aerator SCM

SCL / SC series are radial submersible aerators for aeration treatment of wastewater or whenever a mixing process requires introduction of air. Homogenisation and equalisation, biological oxidation, sludge stabilisation, flotation of grease are just some of the processes SC aerators can be used in.

The hydraulics (and on request the motor) is entirely made of stainless steel to ensure a long life, even in the most demanding applications. The supporting base can be customised to fit different tank floors.

Brand: SCM
Country of Origin: Italy

  • 0.75kw – 80kw power range.
  • Suitable for screened wastewater.
  • Excellent results in deep tanks.
  • Small footprint ensure flexible locating and ease of relocation.
  • Self aspirating – No external blower required.
  • Motor protection using seal leakage device and thermal switching.

SLCK

Pressurised

Submersible aerator pressurised

SCLK pressurised aerators are well suitable to deep tanks and high oxygen requirements. They are equipped with a submersible geared motor and a slow-speed impeller.

The impeller draws product up from under the aerator and mixes it with the oxygen while creating agitation in the tank. The air supply can also be turned off and the SCLK used for mixing only.

The system maintains the desired oxygen level and low energy consumption, by balancing the air flow and impeller speed, even on an individual aerator in the basin with use of variable speed drives.

Brand: SCM
Country of Origin: Italy

  • Self-aspiration of pressurised by a blower.
  • S/steel wetted parts with cast iron motor.
  • 7.5kw to 37kw models available.
  • Can operate in tanks up to 14 metres deep.
  • No manifold construction.
  • Mixing with or without air.
  • 130 rpm impeller speed.

AIR-GET

Submersible Jet Venturi Ejector

Submersible jet ejector

The Air-Get aerator is a submersible pump with one or more ejectors. Pumps with different power ratings and hydraulic outputs are coupled to ejectors with different flow rates to meet the demands of a wide range of applications.

The liquid is pumped through one or more ejectors and this process causes a pressure drop that allows the air vacuum to occur through the inlet pipe which is connected to atmosphere. The Air-Get system is particularly useful in wastewater that contains fibres and are unscreened.

Brand: SCM
Country of Origin: Italy

  • Low noise with no aerosol.
  • Input power from 1.5kw to 34kw.
  • Submersible pump with vortex impeller.
  • Excellent mixing abilities.
  • Suitable for a wide range of wastewater types.
  • Can be used for keeping water tanks fresh and mixed.
  • Installation is easy and does not require any particular support structure.