Vertical
Vertical Immersible Sump
The vertical construction is possible for all hydraulic parts manufactured by Salvatore Robuschi. This way it is always possible to use the right impeller according to the pumped liquid.
There are a lot of different systems for lubrication of bearing bushes, so is everytime possible to find the correct solution. The possibility to customise base-plate shape and dimensions, discharge pipe position and column length allows designers and users to place these pumps easily – also to replace existing pumps.
All versions can be supplied with suction strainer and tail pipe.
Brand: Salvatore Robuschi
Country of Origin: Italy
- Performances as per RD / RG / RB / RC series pumps.
- Vortex / Channel / Open and closed impeller options with free passages up to 180mm.
- Column length up to 6 metres.
- Tail-pipes can be used to achieve extra depths.
- Bearing bushes available is Bronze, RULON, PEEK and Vesconite.
- Pumping components available in Cast iron, AISI 304L, AISI 316 SS (CF8M)On request: AISI 904L, Duplex (SAF 2205 + SAF 2507)
Lubrication type A = by pumped liquid B = by external flushing C = Lubrucation in the column. - Perfect alternative to submersible pumps for industrial sump applications.
- Max temperature – dependent on assembly combination.
Cantilever
Cantilever Long Shaft
Cantilever pumps key feature offers no bearings or bushings submerged, therefore the pump is capable of handling solids, even abrasive types without external flushing.
The benefit of having no seals in contact with the liquid means temperatures can exceed 500°C degrees and the pump can operate dry without causing damage. The cantilever pump primes automatically when the liquid covers the impeller, so an additional benefit is that the pump can run without level controls.
The suction pipe allows to empty tanks up to 5 meters depth.
Brand: Salvatore Robuschi
Country of Origin: Italy
- Performances as per RD / RG / RB / RC series pumps.
- Vortex / Channel / Open and closed impeller options with free passages up to 180mm.
- Column length up to 1.5 metres.
- Pumping components available in Cast iron, AISI 316 SS (CF8M)On request: AISI 904L, Duplex (SAF 2205 + SAF 2507) AISI 304L, SANICRO 28, Hastelloy B and C, CA6NM wear resistant material and other alloys on specification.
- Tail-pipes can be used to achieve extra depths.
- Can run dry without damage.
- Perfect alternative to submersible pumps for industrial sump applications.
- Max temperature 500°C – yes really 500°C.