About LPS | Contact LPS | Phone +64 6 868 9075
Christchurch workshop

43 Phillips street, Phillipstown
Christchurch 8011

sales@liquidprocess.co.nz

027 8846 719


Head Office

337 Palmerston Road
Gisborne 4010

sales@liquidprocess.co.nz

+64 6 868 9075


Christchurch Sales Office

316a Marine Drive
Lyttelton 8971

sales@liquidprocess.co.nz

027 8846 719

Select from the dropdown

Dry Mount Solids Handling Pumps

Nova Rotors

NOVA ROTORS

Nova Rotors Progressive Cavity Pumps ~ suitable for pumping thin and thick sludges and slurries and products with up to 40% solids content. Also suitable for pumping high pressures of up to 48 bar.

  • Cast iron and stainless-steel options
  • Elastomer options to suit a wide range of products
  • 7 hopper feed construction types for sludges for 18% to 40%
  • Modular construction meaning lower parts inventory
  • Inspection ports
  • Various drive options with close coupled and long coupled variations
  • Vertical pump options for installation in deep wells or tanks where suction lift is not possible
  • Gentle pumping action and can be used on polymers and injection of chemicals and minerals
  • Small flow dosing pump options

Salvatore Robushi ~ series RG,RC,HG,RS

Salvatore Robushi

Process pumps transfer of industrial products, chemicals, oils, slurries, corrosive products, dewatering.

BRAND ~ SALVATORE ROBUSCHI
COUNTRY OF ORIGIN ~ ITALY

  • Centrifugal pumps
  • Closed, open, channel and vortex impellers
  • Vertical cantilever options
  • AISI 316 SS (CF8M) – G25 Cast Iron
  • On request: Duplex (SAF 2205 + SAF 2507) AISI 304L, SANICRO 28, Hastelloy, Monel, Durimet, Carpenter and other alloys on specification.
  • 14 sealing options
  • Lower cost close coupled option in cast 316 s/steel available
  • Flows to 2000m3/hr
  • Head to 140m

Verderair

Verderair

Air Diaphragm Pumps ~ applications, wastewater, chemicals transfer, slurries, solvents and paints, ink, oils, dewatering.

BRAND ~ VERDERAIR
COUNTRY OF ORIGIN ~ NETHERLANDS

  • Air operated
  • Can stall against closed valve
  • Dry running
  • Positive displacement
  • High suction capability
  • Self-priming
  • Good resistance to abrasive products
  • Choice of many elastomers to handle almost anything
  • Flows 1000 l/pm
  • Pressures to 16 bar

Verderhus

Verderhus

Verderhus® screw centrifugal pumps combine the best features of centrifugal and positive displacement pumps to define a new standard for low head, high flow pumping. Verderhus® pumps transfer your product gently and efficiently. The open impeller allows large solids to be easily pumped that reduces the risk of cavitation, which can cause serious damage to a pump and to the production process. A Verderhus pump will lower both energy use and ownership costs.

Suitable for pumping thick sludge in wastewater treatment, Macerated food waste, Sewage waste, Circulation of lime chemical, Paper pulp, Mining.

  • Clog free operation, reliability for your process
  • Highly efficient, low energy consumption
  • Solids pumping up to 13% of the flow volume
  • Low-shear, gentle pumping action, results in less damage to the product
  • Minimal wear, even with abrasive fluids, longest life time
Wastewater

Wilo Rexabloc

Wilo-RexaBloc / RexaNorm RE

Wilo-RexaBloc / RexaNorm RE ~ sewage pump in block design with standard motor for stationary dry well installation.

  • High operational reliability due to shut bearing bracket design with oil-filled sealing chamber and additional leakage chamber.
  • Optionally with two mechanical seals for increased operational reliability.
  • Equipped with IE3 motors as standard.
  • Optionally available with IE4 premium motors.
  • Simple maintenance due to “back pullout” design. This means the motor and the impeller can be removed without needing to remove the hydraulics from the piping.
  • Channel and vortex impeller options